The thickness of the substance is 4 mm.
If you want, you are able to increase the duration of the construction to 6 yards or longer. To do this, it is sufficient to attach a two-meter extension. When choosing a drawing, then look closely at the distance between the arches. This figure needs to be 65 cm, which is the most appropriate duration for the specified thickness of the material. The width of the doors based on the manufacturer’s drawing is 90 cm.
Before assembling a polycarbonate greenhouse, it is necessary to choose a spot for the place. If that is done correctly, it is possible to provide yourself with a harvest of fresh veggies for the whole calendar year.
The location for the upcoming greenhouse is marked immediately in the planning of their garden plot. To be able to melt the snow at the positioning of the greenhouse as soon as possible, the very best point on the website is going to be a small elevation. Moreover, in such a place will not need to worry about significant humidity as dirt and atmosphere inside the construction.
Assemble a polycarbonate greenhouse in a raised site – intends to care for the optimal temperatures indoors.
When it is not possible to place a greenhouse on an elevated position, you will have to pour a layer of fine shattered rock about 20 cm and the exact same layer of fertile land to make seedbeds.
Before building a greenhouse on your garden gidpostroy.ru plot, it’s also wise to think about where and how this structure is going to be installed. First, you must choose a location for it. The greenhouse should be found in a well-lit area no less than a few meters away from houses, barns and other structures.
How to Put in a greenhouse Based on the Faces of the world
Make sure you measure the soil surface – it is ideal to even remove the top layer. This can also get rid of weed seeds. And for ease of work, eliminate the soil in an area that’s going to a meter wider on all sides of the rectangle that you want.
It’s also worth considering using a foundation. As manufacturers state, now most greenhouses don’t need it, particularly if they (greenhouses) are utilized only in the summer and spring time. However, experienced gardeners still suggest making at least a basic foundation from a pub. It is quite simple – it is sufficient to associate with each other utilizing metal screws and corners four parts of wood using a cross-section of 10 * 10 cm. The size of such a base should be equivalent to the foundation of the future greenhouse.
Simple bar foundation
You might also create a strip foundation of concrete. He’s more reliable than a pub base, but requires greater fiscal and labor costs. Incidentally, the greenhouse, that will be used in the winter, without it and don’t do with it whatsoever.
Stages of the formation of a strip foundation: a schematic representation
Many manufacturers advise to set up greenhouse structures without even building a foundation. Even for this intention, they equip the framework with special T-shaped legs, so that the structure was firmly fixed. But, as practice shows, it’s still required to build a base: therefore and the foundation will be more securely fixed and the components of the foundation in contact with the soil, will be saved much more in its original state.
The most important issue is to see to the material with specific agents to protect the timber from moisture. The material is normally installed on concrete blocks which are dug into the ground. For a six-meter structure, they need 10 bits: four on each side and one at the middle of the ends.
Before you perform the greenhouse itself, you have to choose the right place for this. It has to be an even website, so the framework was located evenly, without distortions. It should be bright and never obscured by buildings or trees.